Paintless Dent Puller – Auto Body Repair Tool Kit, Car Dent Puller with Adjustable Width, Glue Shovel for Auto Dent Removal, Door Dings
Basic Information
HOW TO USE THESE TOOLS:
1. Clean the dent surface with a clean wet cloth.
2. Insert a glue stick into the glue gun, connect the glue gun to a power source and pull the trigger for about 5mins to preheat the glue.
3. Select a suitable tab for the dent mark, (Note: The larger the tab is, the bigger drawing force could be taken.) Use the glue gun to apply enough glue on the tab, then immediately place the tab in the center of the dent while the glue is still hot and melting.
4. Hold the tab till it sticks, then wait for the glue to cool down, normally takes 5-8mins, even shorter in winter.
5. Use the lifter/ puller to pull the tab till the dent has risen up.
6. Clear the glue with alcohol with a plastic shovel, and clean the surface.
7. Repeat the above steps with a smaller tab till the dent had been removed.
8. Use a hammer and tap down tool set slightly modify the surface to make it looks better
No posts found