Digital PH Meter Tester for Water Food Aquarium Pool Hydroponics Pocket Size PH Tester Large LCD Display

PH TESTER Accuracy 0.01 Digital PH Meter Tester for Water Food Aquarium Pool Hydroponics Pocket Size PH Tester Large LCD Display

Feature :

Easy to Use: Simply immerse the pH meter electrode in the solution to be tested, readings are quickly display on a large lcd display

Wide Application: Ideal instrument for any aquarium, the fishing industry, swimming pools, spa, school laboratories, food & beverage, drinking water etc.

Auto Calibrated: Features in-built calibration with 2 buffer powders(included).Just press a button to finish the calibration. This pH meter is factory calibrated. Users can use it directly.

Fast and Accurate Results: No need to work with those annoying color charts and test strips.Resolution: 0.01 pH, Accuracy: ±0.01 pH

Compact Portable Design: Pocket fitting pH meter that's also lightweight and compact. Total concealed fit in your bag or pocket for easy, casual carrying.

Item Describe:

1. Display: LCD Digital

2. Accuracy: 0.01

3. Resolution: 0.01

4. Operating Temperature: 0~60°C

5. Measuring Range: 0.00~14.00

6. Probe Type: Precision glass bulb electrode

How To Use :

1. Remove protective cap.

2. First rinse the electrode with distilled water and suck it with filter paper.

3. Turn the meter on by pressing “ON/OFF” key.

4. Immerse the pH meter electrode in the solution to be tested (should not be over the immersion line).

5. Stir gently and wait around 30 seconds till the reading stabilizes.

6. After finishing, clear the electrode with pure water, turn the meter off by pressing “ON/OFF” key.

7. Always replace the protective cap after use.

Steps :

1. Turn on PH meter

2. Disolve each buffer solution in 250ML of distilled water

3. Immerse the electrode into the PH 6.86 solution,(under the temperature of 25)

4. Press the “CAL”(calibration)button for 5 seconds and release

-Display will start flashing 6.86

-Wait until the display stops flashing.

Rinse the electrode with distilled water and dry it with filter paper.

5. Immerse the electrode in PH 4.00 solution,

-Press“CAL”button for 5 seconds,then press and release immediately second time

-Reading will start flashing 4.00

-Wait until display stops flashing

Rinse and dry the electrode with distilled water as before.

6. Place the meter back to the buffer solution to test calibration.If incorrect,please repeat the calibration

7. If approximate PH of your test solution is known to be above 7.0,calibrate the meter using 6.86 and 9.18 solution. To do this,please follow the calibration chart,The third step is the calibration method for 9.18 point.  
 

Package include:

1pc * pH Meter 

2pc * Bags Buffer Powder

1pc * Instruction Manual

Kindly Reminder:

1. If the tester was used or lay aside long time: recalibrate it.

2. If you open battery case or replace battery: recalibrate it.

3. The glass bulb of the electrode is fragile. Don't touch it by hard tools and fingers, suck the water on it gently when cleaning.

This item come without  battery, and it need LR44

cell BATTERY

ATTENTION: Due to security issues，No Battery Included.

1. We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.

2.Payment must be made within 3 days of order.

3. If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)

2. All orders will be shipped out within 3 working days after we have successfully received your payment.

3. We offer regular Post Air Mail and have set up free shipping methods.

4. Since the trade is trans-national, as well as airmail is the cheapest shipping method, it will take a long time for delivery. If you don’t want to wait such a long time, please choose Express and pay the fee.

5. We are not responsible for your Customs duty.

1. If items are found in bad condition when received, please contact us freely. We can refund the money or resend a new one to you.

2. If you are not satisfied with the product because of personal preference, you can return it to us within 7 days. You need to pay the freight.

3.All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.

1.12 months warranty

2.If you are not satisfied when you receive your item or with quality problem,please contact us,we can offer return or resend warranty but please offer evidence to show the problem actively.

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.